Table of Contents
Advertisement
Routing
In this section, you can configure default gateways, static routing, policy routing and RIP settings.
Default Gateway
On this page, you can configure the default gateway interface list to establish access priority, that is, iInterfaces are accessed in the
order listed in the
Selected Default Gateway Interfaces
1. In the left navigation bar, select
2. Select the interfaces that you want used as default gateway interfaces. Click the arrows to move your selection between the
columns. Move the highest priority interface first, followed by the next highest priority interface, and so on.
3. (Optional) In the
Selected WAN Interface
appears in this field.
4. Click
Apply/Save
to commit your changes.
Static Route
On this page, you can configure static routes for your network. A static route is a manually configured, fixed route for IP data. You
can enter a maximum of 32 entries.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
column.
Advanced Setup
> Routing. The following page appears.
field, select an IPv6 interface. You must configure the IPv6 interface before it
76
Advertisement
Table of Contents
