Table of Contents
Advertisement
8
4
Installation
4.1
Tools Needed
To install the NetGuardian, you'll need the following tools:
Phillips No. 2 Screwdriver
PC with terminal emulator,
such as HyperTerminal
4.2
Mounting
The NetGuardian mounts in a 19" or 23" rack and can be mounted in the flush-mount or rear mount
locations, as shown in.
The rack ears can be rotated 90° for wall mounting or 180º for other mounting options.
Fig. 4.1 NetGuardian can be flush or rear-mounted
Small Standard No. 2 Screwdriver
Advertisement
Table of Contents
Need help?
Do you have a question about the NetGuardian 216 G4 and is the answer not in the manual?
Questions and answers