DPS Telecom NetGuardian 216 G4 User Manual page 51

Check all
Edit logon profiles Enables the user to add/modify user profiles and password information.
View monitor pages Allows the user to access Monitor menu options.
Send relay
commands
TTY access (access
via Craft port or via
Telnet)
Initialize config to
factory defaults
Upload new
firmware, description
recordings, or config
Get audit log
Purge (delete) audit
log
Get (backup) config Backs-up all user profile configuration settings.
Get and delete
analog history
Get and delete
description
recordings
Once you've finished configuring a profile, click Save to store your changes locally.
To access another profile, simply click Go to profiles summary at the bottom of the page. You may
also navigate away from the user profiles screen at any time by clicking any of the menu options on the
left side of the screen.
User Profile
Enables all Access Rights
Allows the user to send commands to operate the device's control relays.
Grants the user access to the unit via TTY interface (via craft or telnet).
Allows the user to use the Initialize option in the Device Access menu,
resetting the NetGuardian V16 G2 to factory default settings. All user settings
will be lost.
Allows the user to upload firmware or backed-up configuration files.
Allows the user to access the Audit Log (Get Log command).
Allows the user to deletes the existing audit log.
Allows the user to access and delete the analog and sensor history.
Allows the user to access and delete the recorded analog and sensor history.
User profile field descriptions
47