Table of Contents
Advertisement
6
4
Installation
4.1
Tools Needed
To install the Cell16 , you'll need the following tools:
Phillips No. 2 Screwdriver
PC with terminal emulator,
such as HyperTerminal
4.2
Mounting
The Cell16 mounts in a 19" or 23" rack and can be mounted in the flush-mount or rear mount locations, as shown
in.
The rack ears can be rotated 90° for wall mounting or 180º for other mounting options.
Small Standard No. 2 Screwdriver
Cell16 can be flush or rear-mounted
Advertisement
Table of Contents
Need help?
Do you have a question about the CellVoice 16 and is the answer not in the manual?
Questions and answers