DPS Telecom NetGuardian 216 G4 User Manual page 44

40
4. At the SNMP Notification screen, you'll enter your network's SNMP settings. Enter the IP address of
your SNMP Trap Server. Enter the Trap Port Number (usually 162) and the Trap Community
password. Click Save and Next.
Fig. 10.9
5. At the Schedule screen, you'll select the exact days/times you want to receive SNMP notifications.
You can set 2 schedules per notification. For example, you may want to receive notifications at certain
times during the week, and at different hours on the weekend. Use the check boxes to select the days of
the week, and select the time from the drop down menus. Click Save and Finish. To try a test
notification, click the Test button (See next step.)
Fig. 10.10
6. If you chose to test the email notification you've just setup, you will prompted with a pop up . Click OK
to send a test SNMP alarm notification. Confirm all your settings by checking your alarm master to see if
the SNMP trap was received.
NOTE: This test only means that your notification settings are correct, but you still need to assign the
notification to an alarm point. See Step 6 in "How to Send Email Notifications" for more detail.