Unsatisfactory Cleaning And Corrosion - Miele PG 8583 CD Operating Instructions Manual

Problem solving guide

Unsatisfactory cleaning and corrosion

Problem
There are white deposits
on the wash load.
142
Possible cause and solution
The water softener is set too low.
Set the water softener to the correct water hardness.

There is no salt in the salt reservoir.
Refill with reactivation salt.

The quality of the water for the final rinse was insufficient.
Use demineralized water (DI) with a low conductivity.

If the machine is connected to a water demineralization

cartridge, check the conductivity level and replace resins
as necessary. If the machine is connected to a DI water
purification system, consult the manufacturer of the
purification system.
The water from the DI water connection is not sufficiently
demineralized.
Check the external demineralization system. If

necessary, replace the demineralization cartridge with a
new one.