Test Program - Miele PG 8583 CD Operating Instructions Manual

Renaming a
dispensing
system
If required the name of the dispensing system "
extended to include additional information e.g. "
The name "DOS" and the accompanying number cannot be changed.
Document all changes of factory settings in case of a subsequent
Service call.
If the option
- Change name
has been selected, the display changes to the following view:
Change name
The current name is shown on the second line of the display. This can
be changed using the options shown in the bottom line. The top line
shows which option has been selected from the bottom line.
Names may consist of up to 15 characters including spaces. The
following options are available:
- Letters from A to
each new word will start with a capital letter.
0
- Numbers from to
- Space .
- Use the  symbol to delete the last position.
- The name is saved when the
The display will then revert to the initial menu.
- The  symbol in the display or the  button end the process
without saving the name change. The display reverts to the initial
menu.
Use the arrow buttons  (right) and  (left) to move the cursor to

the option you require.
Confirm each entry with OK.


Test program

Various programs are available for monitoring cleaning performance
in routine testing.
See "Maintenance" for more information on these programs.
Z ,
9
.
OK
symbol in the display is selected.
Additional settings
DOS1
" etc. can be
DOS1 cleaning agent
".
87