Unsatisfactory Cleaning And Corrosion - Miele PG8582 CD Operating Instructions Manual

Problem solving guide
Problem
Obstruction sensor

Unsatisfactory cleaning and corrosion

Problem
There are white deposits
on the wash load.
The wash load is flecked.
136
Cause and remedy
Protruding wash load items or objects are blocking the
door, e.g. towels.
The door was closed before the door lock rail was fully
retracted.
Open the door.

Remove all objects and sort the wash load so that it

does not obstruct the door.
The door lock rail must be fully retracted before you

close the door again.
Cause and remedy
The water softener is set too low.
Set the water softener to the correct water hardness.

There is no salt in the salt reservoir.
Refill the reactivation salt.

The quality of the water for the final rinse was insufficient.
Use water with a low conductance value.

If the machine is connected to a water softening

cartridge, check it and replace as necessary.
The water from the AD water connection is not sufficiently
softened.
Check the pre-selected water softening units. If

necessary, replace the water softening cartridge with a
new one.
The rinsing agent reservoir is empty.
Refill the reservoir.

The rinsing agent concentration is set too low.
Contact Miele Service to have the dispensing

concentration reset.