Report; Temperature Unit; Program Settings - Miele PG 8583 CD Operating Instructions Manual

Additional settings
80

Report

You can choose between two different report formats of process
reports for the purpose of archiving.
More information on selecting these can be found in "Process
documentation".

Temperature unit

During a program the temperature display is refreshed every 2 to 5
seconds depending on the program stage. The temperature can be
displayed in degrees Celsius (°C) or Fahrenheit (°F).
The temperature unit is set at the factory to °C.
If the temperature unit is changed to °F, the temperature displayed is
automatically recalculated.
Open the menu as follows:

Button 
 Additional settings
Temperature unit

Temperature unit
- °C
Display temperature in degrees Celsius.
°F
-
Display temperature in degrees Fahrenheit.
Select an option using the  and  arrow buttons.

Press OK to save the setting.


Program settings

You can use this menu to customize the current program to suit
technical requirements and the load items or to reset all programs to
the factory default settings.
Additional specialist knowledge is required to alter program settings
and this should therefore be undertaken only by experienced users or
by Miele Service.
More information can be found in "Program settings".
°C
°F