Volume - Miele PG 8583 CD Operating Instructions Manual

Volume

A buzzer which is integrated into the control panel can give an
acoustic signal in the following situations:
- When buttons are pressed (keypad tone)
- End of program
- System messages (information)
Open the menu as follows:

Button 
Settings 

 Volume
Buzzer tones
-
Setting the buzzer volume for program end and system messages
(information).
- Keypad tone
Setting the buzzer volume for keypad tone.
Select an option using the  and  arrow buttons.

Confirm your selection with OK.

Keypad tone
When
immediately. When
select for which tone,
adjust the volume.
Keypad tone
Quieter
The volume level is represented by a bar chart. On the lowest setting
the buzzer tone is switched off.
Use the arrow buttons  (

Press OK to save the setting.

Volume
Keypad tone
Buzzer tones
has been selected, you can adjust the volume
Buzzer tones
has been selected, you must first
Warning Program end
or
Louder
Louder and  (
Settings 
, you would like to
Program end
Quieter Louder
Quieter
) to set the volume.
71