Operation
Changing the
filter
Cleaning the filter
combination
Low fill levels
60
System messages
After the machine is switched on or a program sequence is
completed, a series of system messages may be shown on the
display. These indicate e.g., low fill levels in the containers or required
maintenance.
Several hours before reaching the maximum permitted operation
hours, you will be prompted to change the air filters.
Change coarse filter?
Now
Later ( operating hrs.)
Confirm the message with OK and change the filter according to
the instructions in the section "Maintenance".
The filters in the wash cabinet must be checked daily and cleaned
regularly; see "Maintenance / Cleaning the filters in the wash cabinet".
A counter in the controls can be activated to remind you of the
required cleaning at regular intervals.
Follow the instructions in the "Maintenance" section for cleaning the
filters.
When the fill level is low in one of the containers, e.g., for process
chemicals or the salt reservoir, you are prompted to refill the
container.
Refill DOS
Acknowledge the messages with OK and refill the relevant
containers. To do this, follow the instructions in the sections
"Adding and dispensing process chemicals" and "Water softener".
Clean filter comb.?
Now
Later ( Programs)
Clean filter combination!
Change HEPA filter?
Now
Later ( operating hrs.)
Refill salt