Miele PG 8583 CD Operating Instructions Manual page 111

Setting the
holding time
The holding time is the duration in which the wash block temperature
is kept constant.
...
Holding time

The duration can be set in 1 minute increments. The possible range is
shown in the bottom line.
If process chemicals are to be dispensed in this wash block, the
holding time will equal at least to the dispensing (DOS) contact time.
It is not possible to set a lower value.
Use the arrow buttons  (higher) and  (lower) to set the holding

time.
Press OK to save the setting.

Holding time
1 Min
(0 - 15 Min )
Program settings
111