Miele PG 8583 CD Operating Instructions Manual page 113

Setting the
temperature and
time
Setting
temperature 1
Setting drying
time 1
Setting
temperature 2
The drying phase consists of two blocks. The temperature and
duration (holding time) must be set for each block.
The first block (temperature 1 and drying time 1) is not assigned in all
programs, but if necessary can be set up by Miele Service.
...
Temperature 1

The temperature is set in 5° increments. The possible range is shown
in the bottom line of the display.
Use the  (higher) and  (lower) arrow buttons to set the

temperature.
Press OK to save the setting.

...
Drying time 1

The holding time is set in 1 minute increments. The possible range is
shown in the bottom line of the display.
Use the  (higher) and  (lower) arrow buttons to set the holding

time.
Press OK to save the setting.

...
Temperature 2

The temperature is set in 5° increments. The possible range is shown
in the bottom line of the display.
Use the  (higher) and  (lower) arrow buttons to set the

temperature.
Press OK to save the setting.

Temperature 1
75 °C
(50 - 115 °C)
Drying time 1
30 Min
(0 - 120 Min)
Temperature 2
75 °C
(50 - 115 °C)
Program settings
113