Detergent; Refilling Liquid Cleaning Detergent - Miele PG 8583 CD Operating Instructions Manual

Refilling liquid
cleaning

detergent

Adding and dispensing process chemicals
Detergent
 Damage caused by using unsuitable detergents.
Using unsuitable detergents, such as a detergent for a domestic
dishwasher, will mean that the reprocessing result is not as
expected.
Only use detergents that are suitable for laboratory glassware
washers.
The machine is only designed for use with liquid cleaning detergents.
Liquid cleaning detergent is dispensed from an external container via
a suction lance.
For environmental reasons it is important to always consider the
following factors when selecting a cleaning agent:
- How alkaline does the cleaning agent need to be for the cleaning
application involved?
- Are protein-removing enzymes required and is the program cycle
suitable for this?
- Are surfactants required for proper dispersal and emulsification?
- Is a cleaning detergent containing active chlorine required or can a
detergent without active chlorine be used?
 Cleaning detergents containing chlorine can damage the
elastomers of the machine.
If the use of detergents containing chlorine is required, a maximum
temperature of 167°F / 75°C in the "Dispensing detergent" program
blocks is recommended (see program chart).
In machines equipped with special oil-resistant elastomers (from
the factory) for oil and grease applications, cleaning detergents
containing chlorine may not be used!
For cleaning specific types of soiling, and for information on the
optimum cleaning agents and additives to use for liquid dispensing,
please contact Miele Service.
Open the drawer in the side unit.

Remove the liquid cleaning agent container (blue marking) and

place it on the open cabinet door or on a surface which is robust
and easy to clean.
Take the lid off the canister and remove the suction lance. Place the

suction lance on the open wash cabinet door.
Replace the empty container with a full one.

51