Routine Checks; Cleaning The Filters In The Wash Cabinet - Miele PG 8583 CD Operating Instructions Manual

Laboratory glassware washer
Hide thumbs Also See for PG 8583 CD:
Table of Contents

Advertisement

Routine checks

Before the start of each working day, the operator must conduct a
series of routine checks. A routine checklist is supplied with the
machine.
The following items must be checked:
- All filters in the wash cabinet
- The spray arms in the machine and on any wash carts or baskets
- The wash cabinet and the door seal
- The dispensing systems
- The wash carts, baskets, modules, and inserts
- The filters in the load carriers

Cleaning the filters in the wash cabinet

The filters in the floor of the wash cabinet prevent coarse soiling from
coming into contact with the circulation system. Filters can become
blocked by soiling, so they need to be checked every day and
cleaned as necessary.
 Risk of damage due to blocked waterways.
If the filters are not inserted, dirt particles will end up in the
machine water circuit. The dirt particles may block the nozzles and
valves.
Only start a program if the filters are inserted.
Check that the filters are positioned correctly when you reinsert
them after cleaning.
In the controls, it is possible to set a cleaning interval for the filters in
the wash chamber, see "Settings /Filter maintenance".
The cleaning interval is not a substitute for the daily routine check of
the filters in the wash chamber!
 Danger of injury from glass shards, needles etc. which are
retained in the filters.
Turn the microfine filter in the direction of the arrow and remove it
together with the coarse filter.
Maintenance
121

Advertisement

Table of Contents
loading

Table of Contents