Cancelling A Program; Program Cancelled Due To A Fault; Cancelling A Program Manually - Miele PG 8583 CD Operating Instructions Manual

Program
cancelled due to a
fault
Cancelling a
program manually
Restarting the
program

Cancelling a program

 If a program is cancelled, the items in the machine must be
reprocessed again.
 Be careful when opening the door.
The wash load could be hot. Danger of scalding, burning, and
chemical burns.
The program stops prematurely and an error message appears in the
display.
Take appropriate steps to resolve the fault, depending on its cause
(see "Problem-solving guide").
A program which is already running should only be cancelled if strictly
necessary, e.g. if the wash load is moving about significantly.
Press and hold the Start/Stop button until the display changes to

the following view:
Program cancellation
No
Yes
Use the  and  arrow buttons to select

Pressing the OK button interrupts the program. Entry of a code may

also be required (see "Further settings/Code").
If no button is pressed for several seconds, or if the process is
cancelled using the  button, the display will revert to the program
sequence display.
Start the program again or select a new program.

Operation
Yes
.
59