Add A Sign In Banner - Cisco TelePresence SX20 Quick Set Administrator's Manual

Cisco TelePresence SX20 Quick Set

Introduction

Add a sign in banner

Sign in to the web interface, and navigate
to Security > Sign In Banner.
1. Enter the message that you want to
present to the user when he signs in.
2. Click Save to activate the banner.
D15329.08 SX20 Administrator Guide CE9.2, NOVEMBER 2017.
Configuration Configuration Peripherals Maintenance
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
26
Administrator Guide
System settings Appendices
About sign in banner
If a system administrator wants to provide
initial information to all users, he can
create a sign in banner. The message is
shown when the user signs in to the web
interface or the command line interface.