Add A Sign In Banner - Cisco Webex DX70 Administrator's Manual

Cisco Webex DX70 and DX80

Introduction

Add a sign in banner

Sign in to the web interface and navigate
to Security > Sign In Banner.
Add a sign in banner
1. Enter the message that you want to
present to the user when he signs in.
2. Click Save to activate the banner.
Delete a sign in banner
• Click Clear to remove a sign in banner.
D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020.
Configuration Configuration Peripherals Maintenance
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
29
Administrator Guide
Device settings Appendices
About sign in banner
If a device administrator wants to provide
initial information to all users, he can
create a sign in banner. The message is
shown when the user signs in to the web
interface or the command line interface.
The maximum size is: 4 kByte
Welcome banner versus sign in
banner
Sign in banner:
• The banner is shown before the user
signs in to the web interface or the
command line interface.
Welcome banner:
• The banner is shown after the user
has signed in to the web interface or
the command line interface.