Christie Act Actions; Jnior Actions - Christie CP2308-G User Manual

Action Item
Projector

Christie ACT actions

These are the available built-in commands for the Christie ACT:
Command
Buzzer
Button
Pulse Relay
Open Relay
Close Relay
Pulse GPO
Set All GPOs
Run Script
Flash LED
Set All LEDs

JNIOR actions

These are the available built-in commands for JNIOR devices:
Command
Open Relay
Close Relay
CP2308-G User Guide
020-102863-01 Rev. 1 (05-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Available Actions
Disable Subtitle
Jog
Douser Open
Douser Close
Light On
Light Off
Standby
Channel
Revert Warp File
Full Power
Wait
Description
Activates the buzzer for the specified time (in milliseconds)
Simulates pressing or holding the ACT button
Sends a pulse to a specific relay
Opens a specific relay
Closes a specific relay
Sends a pulse to a specific GPO pin
Sets the values for all GPO pins
Runs a script on the Christie ACT
Causes a specific LED to flash
Sets values for all of the LEDs
Description
Opens a specific JNIOR relay
Closes a specific JNIOR relay
Description
Disables subtitles for the current content and onward
Moves content forward by the time specified
Opens the douser
Closes the douser
Turns the light on
Turns the light off
Puts the projector in standby mode
Selects a specific projector channel
Reverts a modified warp file to the default settings
Places the projector in full power mode (douser open,
light on)
Delays the execution of a macro
Automation
73