Table of Contents
Advertisement
Light source safety precautions for the end
product
Read all safety and warning guidelines before operating the projector light source.
Warning! If not avoided, the following could result in death or serious injury.
•
Do not operate the cinema projector without all of its covers in place.
•
Do not look directly into the lens when the light source is on. The extremely high brightness can
cause permanent eye damage.
•
Possible hazardous optical radiation emitted from the end product.
AC/power precautions
Learn the safety precautions related to AC power.
Warning! If not avoided, the following could result in death or serious injury.
•
SHOCK HAZARD! A dedicated, protected ground or earth wire must be installed on the product
by Christie qualified technicians or electricians before it can be connected to power.
•
SHOCK HAZARD! Only use the AC power cord provided with the product or recommended by
Christie.
•
FIRE AND SHOCK HAZARD! Do not attempt operation unless the power cord, power socket, and
power plug meet the appropriate local rating standards.
•
SHOCK HAZARD! The AC power cord must be inserted into an outlet with grounding.
•
SHOCK HAZARD! Do not attempt operation if the AC supply is not within the specified voltage
and current, as specified on the license label.
•
SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,
removing components, or opening any enclosure.
•
The appliance coupler and main power supply plug must be easily accessible for disconnecting
the product from the power source.
Caution! If not avoided, the following could result in minor or moderate injury.
•
Only Christie qualified technicians are permitted to open product enclosures.
•
Install the product near an easily accessible AC receptacle.
•
For products containing surge suppressors, you must adhere to the installation and power
requirements.
Installation and Power Requirements
The protected earth wire must be green/yellow 12 AWG minimum.
You must use a 20A branch circuit breaker for Input A.
Light intensity hazard distance
The light intensity hazard distance, if applicable, must be determined and implemented when the light
source is incorporated.
CP2308-G User Guide
020-102863-01 Rev. 1 (05-2018)
Copyright
2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Safety precautions
11
Advertisement
Table of Contents
