Enabling Dolby Atmos; Editing Dolby Atmos Settings; Disabling Dolby Atmos - Christie CP2308-G User Manual

Enabling Dolby Atmos

To play content with Dolby Atmos audio, enable Dolby Atmos.
1. Tap Service Setup > Audio Setup.
2. Tap the Dolby Atmos Configuration tab.
3. Tap the Enable Dolby Atmos slider.
The color of the slider changes to green to indicate it is active.
4. In the Control IP field, type the control IP address.
5. In the Input IP field, type the input IP address.
6. To test Dolby Atmos connectivity, tap Test Connection.
7. Tap Save.

Editing Dolby Atmos settings

Edit Dolby Atmos settings when device settings change.
1. Tap Service Setup > Audio Setup.
2. Tap the Dolby Atmos Configuration tab.
3. Edit the Control IP and Input IP fields.
4. To test Dolby Atmos connectivity, tap Test Connection.
5. Tap Save.

Disabling Dolby Atmos

Disable Dolby Atmos when Dolby Atmos audio playback is no longer required.
1. Tap Service Setup > Audio Setup.
2. Tap the Dolby Atmos Configuration tab.
3. Tap the Enable Dolby Atmos slider.
The color of the slider changes to gray to indicate it is inactive.
4. Tap Save.
CP2308-G User Guide
020-102863-01 Rev. 1 (05-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Managing audio settings
69