Changing the orientation of the projected image
Change the orientation of the projected image from normal to inverted to support multi-projector
installations where deflection mirrors are used.
1. In the left navigation menu, tap Service Setup > Preferences.
2. Tap General.
3. From the Projected Image Orientation list, select the required orientation for the projected
image.
Orientation
Normal Front
Inverted Front
Normal Rear
Inverted Rear
Changing the projector host name
Change the projector host name to make it easier to identify.
1. In the left navigation menu, tap Service Setup > Preferences.
2. Tap General.
3. In the Projector Hostname field, type a name.
4. Tap Update.
Changing the temperature display
Set the touch panel to display temperatures in Celsius or Fahrenheit degrees.
1. In the left navigation menu, tap Service Setup > Preferences.
2. Tap General.
3. In the Temperature Units list, select Celsius or Fahrenheit.
CP2308-G User Guide
020-102863-01 Rev. 1 (05-2018)
Copyright
2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Description
Projection from behind the audience with the projector in the normal, upright
position.
Projection from behind the audience with the projector in an inverted position
(upside down).
Inverted positioning is not supported for CP2308-G projectors. For more
information, see the CP2308-G Installation and Setup Manual.
Projection from behind the screen with the projector in the normal, upright position.
Projection from behind the screen with the projector in an inverted position (upside
down).
Inverted positioning is not supported for CP2308-G projectors. For more
information, see the CP2308-G Installation and Setup Manual.
Operating the projector
22