Before You Begin The Installation; Installation Codes - Xantrex Freedom XC2000-230V Owner's Manual

Before You Begin the Installation

Before You Begin the
Installation
Before beginning your installation:
Read this entire Installation section so you can plan the
n
installation from beginning to end.
Assemble all the tools and materials you require for the
n
installation.
Review the Important Safety Instructions on page vii
n
Be aware of all safety and electrical codes which must be
n
met.
ELECTRICAL SHOCK AND FIRE HAZARD
All wiring should be done by qualified personnel to ensure
n
compliance with all applicable installation codes and
regulations.
Do not connect to AC and DC power sources during
n
installation. Disconnect from all power sources when
servicing.
Disable and secure all AC and DC disconnect devices
n
and automatic generator starting devices.
Failure to follow these instructions can result in death, serious
injury, or equipment damage
14
WARNING

Installation Codes

Governing installation codes vary depending on the specific
location and application of the installation.
It is the installer's responsibility to ensure that all applicable
installation requirements are met.
Freedom XC 2000 - 230V Owner's Guide