Table of Contents
Advertisement
Before You Begin the Installation
Before You Begin the
Installation
Before beginning your installation:
Read this entire Installation guide so you can plan the
n
installation from beginning to end.
Assemble all the tools and materials you require for the
n
installation.
Review the Safety Information on page 1.
n
Be aware of all safety and electrical codes which must be
n
met.
ELECTRICAL SHOCK AND FIRE HAZARD
All wiring shall be done by qualified personnel to ensure
n
compliance with all applicable installation codes and
regulations.
Do not connect to AC and DC power sources during
n
installation. Disconnect from all power sources when
servicing.
Disable and secure all AC and DC disconnect devices and
n
automatic generator starting devices.
Failure to follow these instructions can result in death, serious
injury, or equipment damage
17
WARNING
Installation Codes
Governing installation codes vary depending on the specific
location and application of the installation. Some examples
include the following:
The U.S. National Electrical Code (NEC)
n
The U.S. Code of Federal Regulations (CFR)
n
The Canadian Electrical Code (CEC)
n
Canadian Standards Association/CSA Group (CSA) and the
n
RV Industry Association (RVIA) standards and codes for
installations in RVs
NOTE: It is the installer's responsibility to ensure that all
applicable installation requirements are met.
Freedom SW-RVC Installation Guide
Advertisement
Table of Contents
