Turning The Audible Alarm On Or Off - Xantrex Freedom XC2000-230V Owner's Manual

Operating in Battery Mode

Turning the Audible Alarm ON or OFF

The Freedom XC's audible alarm can be muted. See Adjusting
Settings in Configuration Mode on page 53.
Any warnings such as error or fault conditions or imminent
shutdown are both displayed on the LCD screen and sounded on
the alarm speakers. See To manually reset the alarm: on page 60.
Audible alarm for warning: The unit beeps once when a warning
condition is detected.
Audible alarm for error: The unit beeps once every 5 s for 1 min.
To mute the alarm:
Press any one of the three function buttons.
n
The alarm is automatically muted after 1 min. But the error code
continues to be displayed until the error is cleared.
To manually reset the alarm:
1. Press the Power button to turn it Off (from a down position to
up) and press again to turn it On to reset an active alarm and
clear the error.
2. If the Inverter Ignition Control is set to auto-on, toggle the
ignition signal to clear the alarm and error.
3. Toggle the AC input power to force the transition between
grid mode and battery mode. This action clears the alarm
and error.
60 Freedom XC 2000 - 230V Owner's Guide