Ac And Dc Panel - Xantrex Freedom XC2000-230V Owner's Manual

AC and DC Panel

AC and DC Panel
1 2
15
10 9
12
5
13
Figure 2 AC and DC Panel
8
3
8 7 6
11
12
14 13
ELECTRICAL SHOCK HAZARD
Use a torque screwdriver to tighten the captive nut panel screw to
0.56 N-m torque of force to ensure a proper earth connection and a
required tool access to the wiring compartment.
4
Failure to follow these instructions can result in death, serious
injury, or equipment damage.
5
Table 1 AC and DC Panel Features
Item
ACC input terminal for connecting ignition control wiring.
1 Ignition Control Switch (ACC) for connecting [ON (|)] and
disconnecting [OFF (O)] the ignition signal.
Remote port allows you to connect an accessory remote
2
control / display device.
Captive nut panel screw holds the wiring compartment
3
cover in place. See WARNING above.
4 Ventilation grille (openings) must not be obstructed.
Earthing lug provides an earth path for the Freedom XC
5
chassis to the DC system earth. See WARNING.
6 DC terminal opening for routing (–) negative DC cable.
WARNING
Description
Freedom XC 2000 - 230V Owner's Guide