Xantrex Freedom XC2000-230V Owner's Manual page 72

Adjusting Settings in Configuration Mode
Setting Name
Inverter Shutdown
Recovery
Audible Alarm
Battery Type
Battery Temperature
Battery Temperature
56
Setting Default Range of
Number Value
At0(auto-
restart)
13 MAT
MAT(manual
restart)
bON (Audible)
14 bON
BOF (Mute)
FLD (Flooded),
AGM (AGM),
20 FLD GELGel
USE (Custom)
LFP (LiFePO
CLD(Cold)
21 HOt VRM(Warm)
HOT(Hot)
CLD(Cold)
21 HOt VRM(Warm)
HOT(Hot)
Values
The inverter shuts down when there is an over temperature,
overload, and short circuit condition. Selecting ATO (auto-restart)
will allow the inverter/charger to recover automatically from a
shutdown up to three times maximum. Selecting MAT (manual
restart) allows the user to restart the inverter/charger by performing
a manual reset, that is, by acknowledging the restart via the
display panel.
The alarm beeps once every 5 s.
The use of LFP (LiFePO
BMS. See on page 13 for safety warning instructions.
)
4
Selecting Cold from Warm will increase charger voltage by 0.4V.
Selecting Cold from Hot will increase charger voltage by 0.8V.
Selecting Cold from Warm will increase charger voltage by 0.4V.
Selecting Cold from Hot will increase charger voltage by 0.8V.
Description
) as a battery type requires a compatible
4
Freedom XC 2000 - 230V Owner's Guide