Materials List; Before You Begin The Installation; Installation Codes - Xantrex Freedom EX 4000 Installation Manual

Inverter/charger with 48vdc-to12vdc converter
Hide thumbs Also See for Freedom EX 4000:
Table of Contents

Advertisement

Materials List

The Freedom EX 4000 base package includes the following
items.
1
Freedom EX 4000
2
Installation guide
3
pair of ½" bushings
4
pair of ¾" bushings
5
one network terminator
1
Figure 1 Materials List
NOTE: If any of the items are missing, contact Xantrex or any
authorized Xantrex dealer for replacement. See  Accessories on
page 47.
IMPORTANT: Keep the carton and packing material in case
you need to return the inverter/charger/converter for servicing.
975-0998-01-01
2
3
4
5
Before You Begin the
Installation
Before beginning your installation:
Read this entire Installation guide so you can plan the
n
installation from beginning to end.
Assemble all the tools and materials you require for the
n
installation.
Review the Safety Information on page 1.
n
Be aware of all safety and electrical codes which must be
n
met.
WARNING
ELECTRICAL SHOCK AND FIRE HAZARD
All wiring should be done by qualified personnel to ensure
n
compliance with all applicable installation codes and
regulations.
Do not connect to AC and DC power sources during
n
installation. Disconnect from all power sources when
servicing.
Disable and secure all AC and DC disconnect devices and
n
automatic generator starting devices.
Failure to follow these instructions can result in death, serious
injury, or equipment damage

Installation Codes

Governing installation codes vary depending on the specific
location and application of the installation. Some examples
include the following:
The U.S. National Electrical Code (NEC)
n
The Canadian Electrical Code (CEC)
n
The U.S. Code of Federal Regulations (CFRs)
n
Canadian Standards Association/CSA Group (CSA) and
n
the RV Industry Association (RVIA) standards and codes
for installations in RVs
The American Boat and Yacht Council (ABYC) standards
n
and US Coast Guard Regulations (33CFR183, Sub Part I)
for Marine installations in the U.S.
It is the installer's responsibility to ensure that all applicable
installation requirements are met.
Materials List
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

820-4080-41

Table of Contents