Verify The Fan Board - Oracle SPARC T7-2 Service Manual

Hide thumbs Also See for SPARC T7-2:
Table of Contents

Advertisement

8.
Reinstall all fan modules.
See
"Remove a Fan Module" on page
9.
Reinstall all memory risers.
See
"Install a Memory Riser" on page
10.
Return the server to operation.
See
"Returning the Server to Operation" on page
Authorized service personnel might need to reprogram the product serial number on
Note -
the fan board. This number is used for service entitlement and warranty coverage. The correct
product serial number is located on a label on the front of the chassis.
Related Information
"Remove the Fan Board" on page 141
"Verify the Fan Board" on page 145

Verify the Fan Board

At the Oracle ILOM prompt, start the fault management shell.
1.
-> start /SP/faultmgmt/shell
Are you sure you want to start /SP/faultmgmt/shell (y/n)? y
 
faultmgmtsp>
2.
Type fmadm faulty to check for faults.
If faults are reported, see
If no faults are reported, then the fan board has been replaced successfully.
Related Information
"Install the Fan Board" on page 143
"Remove the Fan Board" on page 141
79.
106.
171.
"Detecting and Managing Faults" on page 29
Verify the Fan Board
.
Servicing the Fan Board
145

Advertisement

Table of Contents
loading

Table of Contents