Servicing The Eusb Drive; Remove The Eusb Drive - Oracle SPARC T7-2 Service Manual

Servicing the eUSB Drive

The eUSB drive is mounted on the motherboard beneath memory risers CM0/MR0, CM0/MR2,
and CM0/MR3. See
These topics describe how to service the eUSB drive.
"Install the eUSB Drive" on page 122
■
"Remove the eUSB Drive" on page 121
■
Related Information
"Detecting and Managing Faults" on page 29
■

Remove the eUSB Drive

This is a cold-service procedure that can be performed by a customer. Power down the server
completely before performing this procedure.
This procedure requires that you handle components that are sensitive to electrostatic
Caution -
discharge. Static discharges can cause the components to fail.
1. Prepare the system for service.
See "Preparing for Service" on page
2. Remove memory risers CM0/MR0, CM0/MR2 and CM0/MR3.
"Front Panel Components (Service)" on page
47.
13.
Servicing the eUSB Drive 121