Verify A Power Supply - Oracle SPARC T7-2 Service Manual

Verify a Power Supply

Verify a Power Supply
1. Verify that the power supply OK and AC Present LEDs are lit, and that the fault
LED is not lit.
See "Power Supply LEDs" on page
2. Verify that the front and rear Service Required LEDs are not lit.
See "Interpreting LEDs" on page
3. Consider these possibilities:
If any of the LEDs are illuminated, see
■
If none of the LEDs are illuminated, the power supply has been replaced successfully.
■
Related Information
"Determine Which Power Supply Is Faulty" on page 87
■
"Front Panel Components (Service)" on page 13
■
"Rear Panel Components (Service)" on page 15
■
90 SPARC T7-2 Server Service Manual • July 2019
85.
35.
"Interpreting LEDs" on page 35.