Oracle SPARC T7-2 Service Manual page 70

Remove a Drive
5. On the drive you want to remove, complete the following tasks.
Caution -
the latch.
a. Push the release button to open the latch.
b. Unlock the drive by moving the latch to the right.
c. Grasp the latch and pull the drive out of the slot.
Caution -
server might overheat due to improper airflow.
6. After you remove an NVMe drive, check that the drive slot's state has changed to
EMPTY.
# hotplug list -lc
7. Install a replacement drive or a drive filler.
See "Install a Drive" on page 72
Related Information
"Install a Drive" on page 72
■
"Remove a Drive Filler" on page 71
■
70 SPARC T7-2 Server Service Manual • July 2019
The latch is not an ejector. Do not bend it too far to the right. Doing so can damage
When you remove a drive, replace it with a filler or another drive. Otherwise, the
or "Install a Drive Filler" on page 74.