Wwan Interfaces - NetModule NB2700 User Manual

NB2700 User Manual

WWAN Interfaces

This page can be used to manage your WWAN interfaces. The resulting link will pop
up automatically as WAN link once an interface has been added. Please refer to chap-
ter 5.3.1 for how to manage them.
The Mobile LED will be blinking during the connection establishment process and goes
on as soon as the connection is up. Refer to section 5.8.5 or consult the system log files
for troubleshooting the problem in case the connection did not come up.
Figure 5.9.: WWAN Interfaces
The following mobile settings are required:
Modem: The modem to be used for this WWAN interface
SIM: The SIM card to be used for this WWAN interface
Service type: The required service type
Please note that these settings supersede the general SIM based settings as soon as the
link is being dialed.
Generally, the connection settings are derived automatically as soon as the modem has
registered and the network provider has been found in our database. Otherwise, it will
be required to configure the following settings manually:
Phone number: The phone number to be dialed, for 3G+ connections this commonly
refers to be *99***1#. For circuit-switched 2G connections you can enter the fixed
35