Table of Contents
Advertisement
NB3720
User Manual for NRSW version 4.4
The following commands are supported:
Command
status
connect
disconnect
reboot
output 1 on
output 1 off
output 2 on
output 2 off
A response to the status command typically looks like:
System: NB2700 hostname (00:11:22:AA:BB:CC)
WAN1: WWAN1 is up (10.0.0.1, Mobile1, UMTS, -83 dBm, LAI 12345)
GPS: lat 47.377894, lon 8.540055, alt 282.200
OVPN: client on tun0 is up (10.0.8.4)
DIO: IN1=off, IN2=off, OUT1=on, OUT2=off
Action
Will reply a message to the sender including a short system overview
Will enable the first WAN link configured on the system
Will disable the first WAN link configured on the system
Initiates a reboot of the system
Turns on the first digital output port
Turns off the first digital output port
Turns on the second digital output port
Turns off the second digital output port
Table 5.95.: SMS Control Commands
126
Advertisement
Table of Contents
