Service; Device Restart - SICK microScan3 - EFI-pro Operating Instructions Manual

7
CONFIGURATION
Figure 73: Report
Contents of the report
1
Composition of the report
2
7.18

Service

7.18.1

Device restart

114 O P E R A T I N G I N S T R U C T I O N S | microScan3 – EFI-pro
You compose the contents of a report individually:
1. Select the contents of the report under Settings for reports.
✓
Safety Designer creates a report with the selected contents.
This section describes service options you have with Safety Designer on the safety laser
scanner.
If you have problems with the device, you can restart the device or subsections of the
device (safety function, connections, additional functions).
Restarting safety function
•
The fastest type of restart
•
Serious faults remain, even if the cause has been rectified (for example a locking
state because of a supply voltage which is too low).
• Communication with the device remains intact (connections for configuration,
safety function and data not relating to safety).
• Communication beyond the device is not impaired.
8021913/15ZW/2019-11-14 | SICK
Subject to change without notice