Installation Of The Rear Cover - Barco DP2K-12C Service Manual

5. Removal and installation of projector covers

5.10 Installation of the rear cover

Necessary tools
Flat screwdriver.
How to install the rear cover of the projector?
1. Install the rear cover of the projector doing the following:
a) Bring the rear cover towards it final position,
b) then gently push the locking studs of the top corners into their receivers
A
Image 5-19
Install rear housing
2. Secure the rear cover by locking the captive screws at the bottom corners of the rear cover.
Image 5-20
Fasten rear housing
88
B
B
R5905043 DP2K-12C/11CX 19/02/2018