Terminal Totals With Instant Tip - Ingenico iCT2XX Operating Manual

SKYZER TECHNOLOGIES
4.0
PRINTING
5.0
RESET TOTALS?
ENTER=YES, CLR=NO
11.13.2

Terminal Totals with Instant Tip

This function allows the merchant to determine the total count and amount of
all accepted transactions supported by the terminal since the totals where last
reset by the merchant.
Step Terminal Display Description
1.0
PAYMARK EFTPOS
1.EFTPOS MENU
2.TIPPING MENU
3.HOSPITALITY MENU
4.ADMIN MENU
5.SUPERVISOR MENU
2.0
ADMIN MENU
1.TOTAL
2.INQUIRY
3.CUTOVER
3.0
1 Merchant 1
2 Merchant 2
3 Merchant 3
4.0
PRINTING
5.0
RESET TOTALS?
ENTER=YES, CLR=NO
INGENICO ICT2XX PTS2018 PAYMARK OPERATING MANUAL
Totals will be printed immediately.
The user will be prompted whether the totals should be reset.
- If YES is selected, the terminal will return to idle and totals will have been reset.
(To check this, repeat steps 1-2. Totals should all appear as $0.00 on the printout.)
- If NO is selected, terminal will return to idle without resetting the totals. (To check
this, repeat steps 1-2. Totals should remain the same.)
Press MENU key and then scroll through using down arrow key until ADMIN MENU
is shown on the display.
Press the corresponding number key or ENTER to access ADMIN menu.
Press the corresponding number key or down arrow key to select TOTAL to perform
a shift totals.
Only applicable with Multi-Merchant setup.
Select the corresponding number on the terminal to select the Merchant followed by
ENTER.
Totals will be printed immediately.
NOTE: This will include the instant tip amounts under purchase that were performed
for merchant's knowledge.
The user will be prompted whether the totals should be reset.
- If YES is selected, the terminal proceed to step 5.0 with totals to be reset. (To
check this, repeat steps 1-2. Totals should all appear as $0.00 on the printout.)
- If NO is selected, terminal will return to idle without resetting the totals. (To check
this, repeat steps 1-2. Totals should remain the same.)
PAGE 124 OF 147
Version 1.00