Multi-Merchant Configuration - Ingenico iCT2XX Operating Manual

SKYZER TECHNOLOGIES

5.3 Multi-Merchant Configuration

This function is used to configure the terminal for Multi-merchant operation. The
terminal can support up to 8 Merchants.
NOTE: After activating the Multi-Merchant configuration, please return to
EFTPOS configuration for Multi-Merchant Function 3824 to enter the Terminal
and Merchant ID's for the active merchants.
Step Terminal Display Description
1.0
2.0
FUNCTION?
3.0
MULTI MERCHANT
SETUP
INGENICO ICT2XX PTS2018 PAYMARK OPERATING MANUAL
Press FUNC
Enter 7418, press ENTER
Terminal is now in configuration mode. Go to following steps to proceed or press
CANCEL to exit, otherwise the terminal will automatically exit after 30 seconds of
inactivity
PAGE 45 OF 147
Version 1.00