Operation Of Terminal; Merchant Logon; Pending Reversal - Ingenico iCT2XX Operating Manual

SKYZER TECHNOLOGIES

10 OPERATION OF TERMINAL

10.1 Merchant Logon

To initiate a Merchant logon, follow the steps below or press the F4 key to
perform a logon:
Step Terminal Display Description
1.0
PAYMARK EFTPOS
1.EFTPOS MENU
2.TIPPING MENU
3.HOSPITALITY MENU
4.ADMIN MENU
5.SUPERVISOR MENU
2.0
SUPERVISOR MENU
1.XTRA
2.LOGON
3.
DUPLICATE RECEIPT
3.0
1 Merchant 1
2 Merchant 2
3 Merchant 3
4 ALL MERCHANTS
4.0
PROCESSING NOW
5.0
ACCEPTED
6.0
PROCESSING
XX OF XX

10.2 Pending Reversal

Prior to removing a terminal from a merchant's site, or reprogramming it with a
new merchant ID, it is important to perform a logon to ensure there are no
pending reversals stored on the terminal.
To clear any pending reversals stored on the terminal, simply initiate a
merchant logon.
Stored pending reversals must be cleared from the terminal in order that all
stored transaction data can be processed through the host.
INGENICO ICT2XX PTS2018 PAYMARK OPERATING MANUAL
Press MENU key and then scroll through using down arrow key until SUPERVISOR
MENU is shown on the display.
Press the corresponding number key or ENTER to access supervisor menu.
Press the corresponding number key or down arrow key to select LOGON to
perform a merchant logon.
Only applicable with Multi-Merchant setup.
Press the corresponding number or down arrow key on the terminal to select the
Merchant followed by ENTER.
Press CANCEL to exit from the menu.
PROCESSING NOW will be displayed
ACCEPTED will be displayed when the terminal has made the connection with
Paymark network.
Terminal will start downloading required files from Paymark where XX represents
the number of files currently being downloaded.
PAGE 76 OF 147
Version 1.00