Ingenico iCT2XX Operating Manual page 78

SKYZER TECHNOLOGIES
3.0
PROCESSING NOW
4.0
ACCEPTED
5.0
EXPIRED PRE-AUTH
TRANS COUNT XXXX
VIEW TRANS Y/N
6.0
TRAN
AUTH
CARD XXXXX....XXXX
TOTAL AMT NZ$XX.XX
REQUIRED TRANS.Y/N
7.0
ORG AMT
FINAL AMOUNT?
8.0
PRINTING
9.0
PROCESSING NOW
10.0
ACCEPTED
11.0
EXPIRED PRE-AUTH
OUTSTANDING
TRANS COUNT XXXX
INGENICO ICT2XX PTS2018 PAYMARK OPERATING MANUAL
PROCESSING NOW will be displayed.
ACCEPTED will be displayed when the terminal has made a successful connectivity
with Paymark and prints of the receipt.
Press ENTER to view the expired pre-auth transactions that are stored on the
terminal and proceed with completing them or CLEAR to not view the transaction
and proceed with step 21.0.
Transaction details are displayed.
XXXXXX
XXXXXX
Press ENTER to retrieve the current transaction to proceed with completion or
CLEAR to proceed with next transaction.
NOTE: The total amount displayed will include the previously authorised amount
plus any top-up amounts already processed for this transaction. This is to notify the
merchant that a top-up transaction was performed.
Key in the amount to be finalised then press ENTER. This can be greater or lesser
$XX.XX
than the authorised amount.
NOTE: If ENTER is pressed without entering the final amount, the
transaction will be finalised for zero dollars.
$XX.XX
Terminal beings to print of the receipts for the cardholder to sign to accept the final
amount entered.
PROCESSING NOW will be displayed on the terminal while processing the
transaction.
Once the transaction is successfully processed to Paymark network, terminal will
display ACCEPTED.
Terminal advises merchant the total number of outstanding expired stored
transaction on terminal. Press ENTER to return to idle screen.
PAGE 78 OF 147
Version 1.00