Installing Ingenico Ipp Series Pinpad; Installing An Ipp280 Pin Pad; Deactivating An Ipp280 Pin Pad - Ingenico iCT2XX Operating Manual

SKYZER TECHNOLOGIES

4 INSTALLING INGENICO IPP SERIES PINPAD

4.1 Installing an iPP280 PIN Pad

To install an iPP280 PIN pad, perform the steps below:
NOTE: Refer to page 19 to see Port Layout as where the PIN pad cable will be
connected to on the iCT2XX terminal. When plugging in, please ensure that
the terminal is powered off.
Step Terminal Display
1.0
2.0
FUNCTION?
3.0
ENABLE
EXTERNAL PINPAD
4.0
PINPAD TYPE
1-IPP310
5.0
6.0
RESTARTING
TERMINAL....
7.0
PAYMARK
EFTPOS

4.2 Deactivating an iPP280 PIN Pad

To deactivate an iPP280 PIN pad, perform the steps below:
Step Terminal Display
1.0
2.0
FUNCTION?
3.0
DISABLE
EXTERNAL PINPAD
INGENICO ICT2XX PTS2018 PAYMARK OPERATING MANUAL
Comment
Press FUNC
Enter 77 and press ENTER.
Press ENTER to enable the external pinpad port on the terminal or CLEAR to
cancel and exit to idle prompt.
Press 2 to select IPP280 and press ENTER or CLEAR to cancel and exit to idle
prompt.
PIN pad will display the backlight display colour to select from. Use the soft or
navigation key on the terminal to select the preferred colour.
Terminal and PIN pad will be restarted to establish the link with each other.
PIN pad will display PAYMARK EFTPOS on the screen once the link with the
terminal is successful.
Comment
Press FUNC
Enter 77 and press ENTER.
Press ENTER to disable the external pinpad port on the terminal or CLEAR to
cancel and exit to idle prompt.
PAGE 23 OF 147
Version 1.00