Gprs Configuration - Ingenico iCT2XX Operating Manual

SKYZER TECHNOLOGIES

8.1.2 GPRS Configuration

Step Terminal Display Comment
1.0
2.0
FUNCTION?
3.0
TMS CONFIG
ENTER OR CLEAR
4.0
TMS TERMINAL ID?
XXXXXXXX
6.0
TMS NII
201
7.0
TMS URL
www.skyzertms.co.n
z
8.0
PRIMARY
HOST IP ADDRESS
202.180.114.12
9.0
PRIMARY
HOST PORT
3200
9.0
APN?
paymarkfreedom.co.
nz
10.0
SAVE CONFIG Y/N
INGENICO ICT2XX PTS2018 PAYMARK OPERATING MANUAL
Press FUNC
Enter 2467 and press ENTER.
Press ENTER to configure the TMS parameters, CLEAR to cancel and exit to idle
prompt.
This parameter specifies the TMS Terminal ID which is by default the last 8 digits of
the terminal serial number.
This parameter specifies the Network International Identifier that the terminal uses
to route messages to TMS.
Press ENTER.
This parameter specifies
www.skyzertms.co.nz.
Press ENTER.
This parameter specifies the Primary Host IP Address. By default is set to
202.180.114.12.
Press ENTER.
This parameter specifies the Primary Host Port number. By default is set to 3200.
Press ENTER.
This parameter specifies the Access Point Name of the Paymark network or any
third party SIM card which has been configured for.
Press ENTER to save the configuration or CLEAR to exit without saving
configuration.
the TMS URL. By
PAGE 65 OF 147
default is set to
Version 1.00