3
Features and Functions
Analog trigger
72
There are three analog trigger conditions in U2300A series
DAQ and the trigger conditions are as follows:
• Above high
• Below low
• Window
It uses two threshold voltages, which are Low- Threshold and
High- Threshold. Users can easily configure the analog trigger
conditions using the Agilent Measurement Manager software.
Above high
The following figure illustrates the above high analog trigger
condition. The trigger signal is generated when the analog
input signal is higher than the High- Threshold voltage. In
this trigger condition, the Low- Threshold voltage is not used.
Figure 3-12 Above high trigger condition
U2300A Series USB DAQ User's Guide