1
Getting Started
C. Install the Hardware Driver
N O T E
10
• Ensure that the USB device is disconnected from your PC before installing the
driver.
• Ensure that the Agilent IO Libraries Suite version 14.2 or higher is installed
before proceeding.
1 Insert the Agilent USB Modular Instrument Product Reference
CD- ROM into the CD- ROM drive of your PC.
2 The installer will automatically launch the Agilent Modular
Products Installation Menu. Select Hardware Driver to begin the
hardware driver installation.
3 If the menu does not launch automatically, go to Start > Run
(on the Windows Start menu) and type <drive>:\Driver\
Hardware\setup_hw.exe, where drive is your CD- ROM
drive. Click OK to begin installation.
4 The following dialog will appear. Click Next > to begin the
installation.
U2300A Series DAQ User's Guide