Agilent Technologies U2300A Series User Manual page 3

Safety Information
The following general safety precautions must be observed during all phases of this instrument. Failure to comply
with these precautions or with specific warnings elsewhere in this manual violates safety standards of design,
manufacture, and intended use of the instrument. Agilent Technologies, Inc. assumes no liability for the
customer's failure to comply with these requirements.
U2300A Series DAQ User's Guide
Safety Symbols
The following symbols indicate the precautions taken to maintain safe operation
of the instrument.
Direct current
Warning
Regulatory Markings
The CE mark shows that the product complies with all the
relevant European Legal Directives (if accompanied by a year, it
signifies when the design was proven).
The CSA mark is a registered trademark of the Canadian Stan-
dards Association. A CSA mark with the indicators "C" and "US"
means that the product is certified for both the U.S. and Canadian
markets, to the applicable American and Canadian standards.
The UL Mark is a registered trademark of Underwriters Laborato-
ries Inc. UL listing mark with the indicators "C" and "US" indi-
cates the product compliance with both Canadian and U.S.
requirements.
The C-tick mark is a registered trademark of the Spectrum Man-
agement Agency of Australia. This signifies compliance with the
Australian EMC Framework regulations under the terms of the
Radio Communications Act of 1992.
III