1
Getting Started
14
3 If the installation menu does not appear after a few seconds, go
to Start > Run (on the Windows Start menu) and type
<drive>:\Application\Modular Instruments
Measurement Manager\setup.exe, where drive is your
CD- ROM drive.
4 Click OK to begin installation.
5 If you do not have the Agilent T&M Toolkit 2.1 Runtime version,
Microsoft .NET Framework version 1.1 and 2.0, and Agilent T&M
Toolkit Redistributable Package 2.1 patch installed, the
InstallShield Wizard software pre- requisite will appear as shown
in the following figure.
U2300A Series DAQ User's Guide