Analog Output Operation Mode
Figure 3-3 Analog output operation mode
U2300A Series USB DAQ User's Guide
There are two D/A channels that are available in the
U2300A series DAQ devices. The two analog outputs are
capable of supplying output voltages in the range of 0 to 10
V and ±10 V (12- bit for U2355A, U2356A, U2331A and 16- bit
for U2351A, U2353A). Each DAC channel drives a maximum
current of 5 mA. The two analog outputs can be used as
voltage sources to your devices under test (DUT). In addition
to this, the analog outputs are also used to output
pre- defined function generators or any arbitrary waveform.
Analog output operation mode consists of voltage output and
continuous output. Continuous output mode is divided into
function generator and arbitrary.
Features and Functions
3
51