•
Always handle optics by their edges.
Use the following recommended tools to clean the optics.
•
Powder-free latex gloves
•
Soft camel-hair brush
•
Dust-free blower - air bulb or a canned air duster without additives such as Techspray 1671- 10S
Ultra-Pure Duster
•
Lint-free lens tissue, such as Lensx 90 tissue or Newport Optics cleaning tissue
•
Lens cleaning solution and a microfiber cloth (for the lens only)
•
Optical grade cotton swabs with wooden stems
•
A bright, portable illumination device such as an LED flashlight
To avoid the risk of scratching the lens, clean the lens only if absolutely required.
Check the condition of the card cage air filter monthly. Clean or replace the card cage air filter sooner if you
are operating the projector in a dusty or dirty environment.
The filter is located on the left side of the projector behind the air filter cover. Use only high efficiency Christie
approved filters.
CP2306-RGBe, CP2308-RGBe, CP2310-RGBe User Manual
020-001835-02 Rev. 1 (05-2021)
Copyright
2021 Christie Digital Systems USA, Inc. All rights reserved.
©
Maintaining the projector
88