Christie CP2306-RGBe User Manual page 49

Edit Intelligent Lens System (ILS) file settings when content requirements change.
1. In the left navigation menu, tap Image Settings > ILS File Setup.
2. In the ILS File list, select an ILS file.
3. Modify the ILS file settings.
4. Tap Save.
To duplicate Intelligent Lens System (ILS) file settings quickly, copy the settings of an existing file to a new
ILS file.
1. In the left navigation menu, tap Image Settings > ILS File Setup.
2. In the ILS File list, select the ILS file you want to copy.
3. Tap Save As.
4. Type a name for the ILS file and tap Save.
Delete an Intelligent Lens System (ILS) file when it is no longer required.
5. In the left navigation menu, tap Image Settings > ILS File Setup.
6. In the ILS File list, select the ILS file you want to delete.
7. Tap Delete.
8. To confirm the deletion, tap Delete.
Use the Reset Lens feature to have the Intelligent Lens System (ILS) find the home position flags that allow
the ILS to compensate for drift over time, or move to its proper position after it has been manually adjusted.
1. In the left navigation menu, tap Image Settings > ILS File Setup.
2. In the ILS File list, select an ILS file.
3. Tap Reset Lens.
4. Tap Continue.
Create source files to store resolution, offset, and aspect ratio settings for input devices. When the Auto
Square Pixels file is selected, the incoming video format is automatically detected.
CP2306-RGBe, CP2308-RGBe, CP2310-RGBe User Manual
020-001835-02 Rev. 1 (05-2021)
Copyright 2021 Christie Digital Systems USA, Inc. All rights reserved.
©
Adjusting the image size and position
49