Christie CP2306-RGBe User Manual page 48

Learn how to enable and modify projector image settings.
Activate the Intelligent Lens System (ILS) to automatically adjust the position of the lens.
1. In the left navigation menu, tap Service Setup > Preferences.
2. Tap Lens/ILS.
3. In the right pane, tap the ILS Installed slider.
The color of the slider changes to green to indicate the ILS is active.
Create an Intelligent Lens System (ILS) file to set the X, Y, zoom, and focus positions of the lens.
1. In the left navigation menu, tap Image Settings > ILS File Setup.
2. Tap Create ILS File.
3. Type a name for the ILS file and tap Create.
4. In the Lens position area, tap the forward, backward, left, or right arrow icons to move the position of
the image on the screen.
5. In the Focus area, to increase or decrease image focus, tap Up (
6. In the Zoom area, to increase or decrease image zoom, tap Up (
7. Tap Save.
Use the Auto Calibrate feature of the Intelligent Lens System (ILS) to find and compensate for motor
backlash, and to determine the movement range for the currently installed lens.
1. In the left navigation menu, tap Image Settings > ILS File Setup.
2. Tap Create.
3. Type a name for the ILS file and tap Create.
4. Tap Auto Calibrate.
5. Tap Continue.
CP2306-RGBe, CP2308-RGBe, CP2310-RGBe User Manual
020-001835-02 Rev. 1 (05-2021)
Copyright 2021 Christie Digital Systems USA, Inc. All rights reserved.
©
) or Down ( ).
) or Down ( ).
48